Operation Manual

page 35 of 49

Menu item Explanation

WPS Mode Supports two ways of configuration:

PBC (Push-Button-Configuration)

PIN Code

PBC (Push-Button-

Configuration)

Select PBC button or press the WPS button on the panel

of your router (press WPS button on the router and

press the WPS button on another network device within

two minutes).

PIN Enable this option, you need to enter a wireless clients

PIN code in the blank field and keep the same code in

the client.

Wireless Advanced Settings

This section is to configure the advanced wireless settings of the router.

If you are not familiar with the setting items on this page, it is strongly recommended

to keep the provided default values; otherwise it may result in poor wireless network

performance!

Menu item Explanation

Wireless Advanced Settings

Beacon Interval Interval for sending packets of the beacon frame (value

range 20 – 1000 ms, default = 100 ms)

DTIM Interval Interval for Delivery Traffic Indication Message (DTIM) –

value range 1 - 255 ms, default = 1ms

RTS Threshold If the packet size is larger than the preset RTS size, the

wireless router will send a RTS to the destination station

to start a negotiation (default = 2347).

Fragment Threshold Sets the fragment threshold. Packets larger than the size