Manualshelf

Use and Care Manual

ManualsBrandsPHI VILLA ManualsDrafting ChairsMesh Seat Reclining Headrest Ergonomic Drafting Chair Office Chair in Black with Arms
123456
ASSEMBLY INSTRUCTION
STEP 3: Attach the Armrests (3) to the Seat Cushion (2) with Six M6x30mm Bolts
(C), using the Wrench (M6).
Attach the Seat Plate (4) to the Seat Cushion (2) using four M6X18mm Bolts (A),
tighten all the bolts with the Wrench (M6).
STEP 4 : Turn the Seat Cushion (2) upright and align the center hole of the seat
plate over the lift, then push the Seat Cushion (2) down onto the Gas Lift (5) firmly
until the connection is
4
3
2
3
2
5