Instructions / Assembly

Table Of Contents

Open the doors, loosen the #1 bolt

a little bit, then close the doors.

Pat and wobble the sides of frame couple times

until the doors are aligned and leveled.

Then tighten the #1 bolts.

Do not over tighten.

After doors are perfectly aligned,

assemble the back panel and tighten

the #4 screws.

FINISH!

Your cabinet is a 100% handmade decorative product,

some assembly tolerances occur, if you are unsatisfied

with the product, please contact us thru service mail,

and do not give us a low star rank online straight away.

Thanks for your kind and mercy.

Step 8 Step 9

Step 10 Step 11

X20