Instructions / Assembly

6
Very Important!!
Anti-Tipping
Hardware Pack & Instruction
Assembly
 When properly installed this hardware can provide
protection against the unexpected tipping of furniture.
 Attach one of the mounting brackets “D” and secure
to the back top edge of the furniture using the short
screw “E”.
 Mark the location on the wall for mounting the second
bracket “D”, create the appropriate sized hole in the
wall and insert the plastic anchor “C”. Secure the
bracket to the wall using the long screw “B”.
 Place the furniture, so the bracket on the back edge
of unit is line with the bracket on the wall.
 Lace an end of the nylon restraint strap “A” down
through each bracket. Bring both ends together and
slide the beaded end of the strap through the keyhole
shaped slot on the other end. Pull down the beaded
end until it snap-locks into the keyhole.

Check to make sure the strap is securely laced and
locked to the brackets.
1 * Nylon Strap(A) 1 * Long Screw(B)
1 * Plastic Screw Anchor(C) 2 * Wall Brackets(D)
1 * Short Screw(E)