Instructions / Assembly
CARE AND MAINTENANCE
12
NOTE:
Always allow re pit to cool COMPLETELY before you cover the re pit with an outdoor weather cover or you
attempt the service or maintenance.
Always dry the product completely before it is covered or stored into the garage.
To enjoy the outstanding performance from your re pit, make sure you perform the following activities on a regular basis:
1. Use warm soapy water for cleaning. Never use ammable or corrosive cleaning agents.
2. While cleaning the re pit, make sure to keep the area around the burner dry at all times. DO NOT submerge the
control valve assembly. If the gas control is submerge in water, DO NOT use it. It must be replaced.
3. Air ow must be unobstructed. Keep controls, burner, and circulating air passageways clean. Signs of possible
blockage include:
(1). Gas odor with extreme yellow tipping of ame.
(2). Fire pit does NOT reach the desired temperature.
(3). Fire pit ame is excessively uneven.
(4). Fire pit makes popping noises.
(5). Spiders and insects can nest in burner or orice. This dangerous condition can damage re pit and render it
unsafe for use. Clean burner holes by using a heavy-duty pipe clearer. Compressed air may help clear away
small particles.
4. Carbon deposits may create a re hazard. Clean burner with warm soapy water if any carbon deposits develop.
5. Cover your re pit with an outdoor weather cover when not in use to protect it from the elements.
LIFE GETS BETTER WITH PHI VILLA