Instructions / Assembly

OPERATION INSTRUCTIONS

Observe Flame Height When Lit:

The burner will display blue and yellow ames. These ames should be a blue / yellow color between

1~2 in. height, (see Figure 18). These ames should not be yellow or produce thick smoke. This would indicate an obstruction of

airow through the burners. The ames should be blue with straight yellow tops.

Figure 18

Yellow

Light Blue

Blue

Good Bad

Figure 17

Lighting Instructions

1. Push in gas control knob slightly and turn to “OFF”.

2. Turn gas control knob to “ON/MIN”.

3. Push in gas control knob all the way and hold. Continue to press the ignition button for 15 seconds.

4. If the burner does not light in 15 seconds, release the knob and it will pop back out. Wait 5 minutes before attempting to light the

burner again and repeat step 1 to 3.

To turn off gas

1. Push in gas control knob slightly and turn to “OFF”.

WARNING:

For your safety, read and follow the Lighting Instructions in this manual and in the Rating Plate on

the appliance. IMPROPER LIGHTING PROCEDURES COULD RESULT IN A FIRE HAZARD OR EXPLOSION

HAZARD OR PROPERTY DAMAGE, INJURY OR LOSS OF LIFE.

1 AAA

1.5V

IGNITOR

(Encendedor)

MAX

(MÁX.)

OFF

(APG.)

ON/MIN

(ENC./MÍN.)

gas control knob ignition button

LIFE GETS BETTER WITH PHI VILLA