Instructions / Assembly

Care and Maintenance
20
Burner Assembly
Removing The Burner Assembly
1. Make sure all control knobs are in the OFF position, the LP gas supply valve has been closed, and
the gas hose is disconnected from the gas supply.
2. Open lid and remove cooking griddle, clip for burner and burners.
3. Slide the burner forward and out of the firebox.
CAUTION:
Ensure the grill is cool before cleaning and conducting maintenance and with the gas supply turned off at
the LP-Gas Cylinder.
Recommended Cleaning Supplies
Mild liquid dish soap, warm water, nylon cleaning pad, wire brush,DO NOT use cleaners that contain acid,
mineral spirits or any abrasive substance.
Outside Surfaces
It is recommended to use only mild dish soap and hot water to clean grill and grill parts.
Rinse with warm water and allow to completely dry.
Inside Bottom Pan of Grill Body
To avoid flare-ups, the bottom pan of the cooking box should be kept clean on a regular basis.Remove
residue using a brush, scraper and/or cleaning pad. Wash with mild dish soap and warm water. Rinse with
warm water. Avoid water splashing into vent tubes of burners.
Grease Cup
Empty the grease cup and clean with mild dish soap and warm water on a regular basis.
Checking The Flame
For maximum fuel efficiency and cooking performance, flame should be a blue-yellow color and be between
1- 2 inches high.
ENJOY YOUR CAPTIVA DESIGNS