Enjoy Your USE AND CARE GUIDE E02GR004 Assembly, Care And Use Instructions Read Carefully Important:Retain These Instructions For Future Reference. h This appliance is for Household use only. This is not a commercial appliance. Questions, problems, missing parts? Before returning to the store, please contact our Customer Service service@alphamarts.com THANK YOU inually create quality products designed to enhance your home.
ENJOY YOUR CAPTIVA DESIGNS Table of Contents Safety Information 2 Curing your smoker 11-12 Warning 3 General Operating Instructions 12-15 Preparation 4 Cleaning and Maintenance 16 Components 5-6 Environmental Protection & Disposal 16 Assembly Instructions 7-10 Warranty 17 Safety Information Assembler/Installer This instruction manual contains important information necessary for the proper assembly and safe use of this appliance.
ENJOY YOUR CAPTIVA DESIGNS Warning WARNING: Risk of burning! • Make sure that the smoker is standing on a flat and fireproof surface that is not made of glass or plastic. WARNING: This smoker will become very hot, do not move it during operation! • Always wear smoker gloves when grilling or adjusting the vents as well as when using a chimney starter. • When preparing food, adjusting the vents, placing charcoal and using the thermometer or lid always wear barbecue gloves.
ENJOY YOUR CAPTIVA DESIGNS Preparation Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents above. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts. Estimated Assembly Time: 20 minutes. Tools Required for Assembly: Wrench (not included) and Phillips Screwdriver (not included) Components Hardware Contents Item No.
ENJOY YOUR CAPTIVA DESIGNS Components 1. Lid 2. Body 3. Cooking Grate 1a 1b 1a: Lid –1pc 1b: Air vent –1pc Qty:1 4. Charcoal Grate 5. Charcoal Bowl Qty:1 7. Handle 6. Water Bowl Qty:1 8. Short Grate Bracket Qty:3 10. Leg Qty:2 Qty:1 9. Long Grate Bracket Qty:3 11. Thermometer / Nut Qty:3 12.
ENJOY YOUR CAPTIVA DESIGNS Components 1b 11 1a 7 2 8 3 6 4 9 5 12 10 6
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions Please read the assembly instructions carefully and follow the safety precautions. Allow sufficient time for assembly. Before starting assembly, clear an area measuring approximately two to three square meters. Remove the item from the packaging. Lay out all of the parts and any necessary tools so that they are within easy reach.
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 2 8 9 A 8
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 3 12 B 4 1 H G E F C 1b 7 D – This wing nut is pre-assembled on the thermometer 11 9
ENJOY YOUR CAPTIVA DESIGNS Assembly Instructions 5 3 6 4 5 6 10
ENJOY YOUR CAPTIVA DESIGNS Curing Your Smoker Prior to your first use of the smoker, follow the instructions below carefully to cure your smoker. Curing your smoker will minimize damage to the exterior finish as well as rid the smoker of paint odor that can impart unnatural flavors to the first meal prepared on the smoker. IMPORTANT: To protect your smoker from excessive rust, the unit must be properly cured and covered at all times when not in use.
ENJOY YOUR CAPTIVA DESIGNS Curing Your Smoker Step5 With charcoal burning strong, close the lid. Allow the temperature to reach 225°F (107°C) on temperature gauge. Maintain this temperature for 2 hours. Step6 Increase the temperature to 400°F(205°C) on temperature gauge. This can be achieved by adding more charcoal and / or wood . Maintain this temperature for 1 hour then allow unit to cool completely.
ENJOY YOUR CAPTIVA DESIGNS General Operating Instructions Step3 Saturate charcoal with lighting fluid. With lid open, wait 2 to 3 minutes to allow lighting fluid to soak into charcoal. Store lighting fluid a safe distance from the smoker. Step4 With smoker lid open, stand back and carefully light charcoal. Allow to burn until covered with a light ash (approximately 20 minutes). WARNING: Charcoal lighting fluid must be allowed to completely burn off prior to closing smoker lid (approximately 20 minutes).
ENJOY YOUR CAPTIVA DESIGNS General Operating Instructions WATER SMOKING Step1 Put the charcoal in the charcoal bowl and light it up, carefully following the instructions on building a fire that are listed on pages 11-13 Step2 Once unit is lit, position water bowl so rim is resting securely on notched out step of all support brackets. Step3 Carefully, fill water bowl with warm water or marinade to 1" below the rim. A full bowl holds approximate 4 quarts of water and will last for approximately 2-3 hours.
ENJOY YOUR CAPTIVA DESIGNS General Operating Instructions GRILLING Step1 Remove the cooking grates, water bowl and charcoal bowl with grate. Replace the cooking grate on middle bracket. Make sure the rim is resting securely on notched out step of lowest support brackets. Step2 Put the charcoal bowl on the charcoal grate on the middle cooking grate. Step3 Put the charcoal in the chracoal bowl and light it up. lf you choose lighting charcoal. Carefully read manufacturer's warnings and from grill.
ENJOY YOUR CAPTIVA DESIGNS Cleaning and Maintenance WARNING: Risk of burning! Allow the smoker to cool down completely before cleaning it. Never use water to quench the hot smoker. This could result in burning or scalding. Occasional cleaning is necessary to preserve the beautiful appearance of the smoker. Do not use any scouring agents. 1. A rinsing cloth and some water with a commercial detergent is sufficient for the normal cleaning process. 2.
ENJOY YOUR CAPTIVA DESIGNS Warranty 3 LIMITED WARRANTY This warranty is a limited warranty, and applies to the original purchase is required. This is a residential warranty and does not applyto commercial use. This collection carries a (1) year limited warranty and is valid from original date of purchase to the original owner (proof of purchase required). WHAT IS COVERED We warrant the frame to be free of Manufacturing defects to the original purchaser for one year.
