User Manual

12
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Launch the Netflix App
Select a TV show or movie
While your TV show or movie is playing , press the DOWN arrow on your remote
Select Audio (sound ) and Subtitles
Select your preferred audio or subtitle options (Disable Dolby and DTS),or set to STEREO mode
Save your settings
Play the video to test for audio (sound ) output
For more details about Netflix setting ,please click on the link below
Https://help.netflix.com/en/node/372
For Amazon Prime video and Hulu or other video apps, you must also disable Dolby and DTS in setting , the
procedure should be similar to the instructions above ,if additional information is needed ,please consult the
HELP section in apps or you can send mail to [e-mail] ,we will support you ASAP
Specifications
Drivers
Audio Output Power
Frequency Response
Signal-to-Noise Ratio
lmpedance
Power lnput
bluetooth Version
Dimensions
Bluetooth Frequency
Technology
Model
2.25inch*4 + 5.25inch
40W*2+80W=160W R.M.S.
45Hz-20KHz
72dB
4
110V-240V~50Hz/60Hz
Version: 5.0 Range:up to 10m
Soundbar: 860W*64H*76D mm
Subwoofer: 115W*420H*250D mm
2402MHz - 2480MHz
BT/AUX/HDMI TV(ARC)/OPT/USB
P28
SOLUTIONSPROBLEMS
ISSUES
Sound
On the remote control, select the correct audio input.
lf you play audio from the TV through the SoundBar, make sure that the TV is muted.
Restart the soundbar and try pairing again
You have not enabled the Bluetooth function of the device. See the user manual of the device on
how to enable the function.
The device is not correctly connected.
The SoundBar is already connected with another Bluetooth device. Disconnect the connected device,
then try again.
The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle
between the device and the SoundBar.
The Bluetooth reception is poor. Move the device closer to the SoundBar, or remove any obstacle
between the device and the SoundBar.
Distorted sound or echo
Bluetooth
A device cannot connect
with the SoundBar
Quality of audio play from
a connected Bluetooth
device is poor.
The connected Bluetooth
device connects and
disconnects constantly
Connect the audio cable from your SoundBar to your TV or other devices. However, you do not need a separate
audio connection when the SoundBar and TV are connected through HDMI ARC connection
No sound from
SoundBar speakers