User Manual

11
Optical Mode
Use this operating mode to play music from the optical digital input for example from a TV on your soundbar.
The TV must have an optical digital output. Use the optical cable supplied to make the connection.
Proceed as follows:
• Connect the optical cable to the optical digital output of your TV.
• Then connect the optical cable to the optical digital input of your soundbar.
• Switch the TV set and sound bar on. Set the connected TV to “PCM Stereo” or “Stereo 2.0”.
• Start playing on the TV.
• Press the INPUT button on the remote control to select OPTICAL mode.
• You can use the volume buttons to adjust the volume to your requirements.
• If you wish, you can change the audio settings using the relevant buttons on the remote control.
HDMI TV(ARC) Output
HDMI TV(ARC) lnput
Optical lnput
Optical Output
HDMI Mode
1. The Soundbar supports HDMI with Audio Return Channel(ARC). lf your TV is HDMI ARC compliant, you can hear
the TV audio through your Soundbar by using a single HDMI cable
2. Using a High Speed HDMI cable, connect the HDMI TV(ARC) connector on the soundbar to the HDMI ARC
connector on the TV. The HDMI ARC connector on the TV might be labelled differently. For details, see the TV
user manual.
If you are using Smart TV apps
Apps such as Netflix's audio by default ,are set to Dolby and DTS for audio (sound ) in some brand TV , this sound
bar does not support Dollby and DTS audio ,for the sound bar operate correctly you must disable Dolby and DTS
in Netflix ,or set auido to STEREO mode . please follow the instructions below :