Reference Manual



plate in front of the lens and capturing a calibration image
that you then apply to all of your capture files you are able to
remove the lens cast.
On medium format cameras the calibration is very simple: You
do one calibration for each lens and then save the calibration
files and apply them when needed by clicking “Set as default
for new Captures”.

Hold the calibration plate in front
of the fixed lens (as close as
possible), and capture. In order
to ensure correct exposure you
may have to up a few f-stops or
in a very dark setup, put on more
light directly onto the plate.
In the Capture One software you
select the ‘calibration’ image and
click on the “Save LCC” button
(the LCC tool is located under the
grey balance tab).
Give the calibration file a name
that corresponds to the lens in use
or the set-up (e.g. 45mmDaylight)
Select the calibration file:
“45mmDaylight” from the “Lens
CC” drop-down list and click “Set
as default for new Captures”.
1.
2.
3.
4.
