Reference Manual





The Phase One P+ back can be used on most large format
cameras via the optional Phase One FlexAdaptor and the
enclosed lens sync cable (value added package only). The P+
back supports most mechanical shutters and the Horseman ISS
electronic shutter. To ensure optimal image quality, Phase One
strongly recommends shutters that can be fired twice within four
seconds. The first release of the shutter activates the CCD, the
second release takes the picture. If the time limit of four seconds
is exceeded, the camera gives a warning “beep” followed by
a “ready” signal. If for some reason it is not possible to fire the
shutter twice within the time limit, the camera will send a time-out
error message to the screen.
Multi connector sync cable
Part # 50300143