Reference Manual




The image area of the Hasselblad camera body is
approximately 6 cm x 6 cm, whereas the image area of the P+
back is a lttle bit smaller. Therefore, it is necessary to use the
P+ back viewfinder mask. Remove the protection tape from the
mask and mount it beneath the original focusing screen.
The viewfinder mask is positioned
in the bracket that holds the
focusing screen. Please refer to
the Hasselblad camera manual
instructions before the focus screen
is removed.
After the Phase One viewfinder
mask is positioned in the bracket,
place the Hasselblad focusing
screen on top of the mask and
slide the viewfinder toP+ back into
place.
