Reference Manual




"Ready beep" is the small beep that sounds from the camera
after a capture is taken.
The "Ready beep" signals that the capture
has been taken, and the P+ back is ready
for next capture. "Ready beep" can be either
"Single", "Multi" or "Off". Default is "Single"
"Multi" is for use in noisy sorroundings, i.e.
where it can be difficult to hear if it was the
back or the flash that made the ready beep.
 
Selecting restore defaults will restore the
settings of the P+ back to its default settings.
Be careful before using this option as all
settings made in the P+ back will be reset to
factory settings.

In "Time & Date" you can set the time and
date using the four buttons on the P+ back.
Left side buttons will step through the hours,
minutes and seconds field, while the right
up and down buttons can be used to set
the value of the fields. The time and date is
applied to all files captured with the P+ back.
