Reference Manual



 

When the P+ back is turned on, the screen will always be in its
home display position or "Main screen".
Pressing and holding down the upper left button on the back will
also bring you to the Main screen, regardless of where you are
in the menu system.
The Main screen has an indicator in the top showing remaining
captures, and a battery indicator at the bottom showing the
remaining battery capacity.
When either indicator reaches zero, it will
start blinking, to indicate that either storage or
battery needs replacement before capturing
any more images.
The main screen also shows the current ISO
setting, white balance setting and IIQ Raw file
format selected.

The Phase One P+ back has four menu buttons to control the
menu system on the display.
When the P+ back is in its initial state (just after power up) or
at the menu systems "home" position (Main screen), the four
buttons each has a shortcut assigned. Play, Menu, ISO and WB.