Reference Manual



 
When working with CF-cards, card readers and digital cameras
it is very important to follow a few rules, to avoid loss of data.
Phase One recommends that you test-drive all new Compact
Flash
TM
cards (including the one enclosed). By doing an initial
test to verify that the capture files are stored properly on the card
and can be accessed on a computer you will avoid unpleasant
surprises on location or when you return from a job. Compact
FlashTM cards are manufactured by other suppliers, and Phase
One cannot guarantee that the cards are not defective.
 
The compact flash card or
microdrive is inserted in the
hidden slot located under the
cover on the left hand side of the
P+ back.
Insert the card with the brand
label facing the display end of
the digital back as shown in the
image.
When the card is fully inserted
no parts are sticking out and the
cover can be closed.
To eject the card push the small
button just above the card once,
and an ejecting pin will come out.
Pushing this pin all the way back in will eject the card.