Reference Manual



Capture One Application (Please see the section specific for
your camera body for more information on what latency setting
to select).

It is not possible to accidentally double expose the image
by capturing one image quickly after another when the P+
back is used on i.e. Mamiya 645 AFD, Hasselblad 555 ELD,
Hasselblad H or Contax 645. The electronic communication
with the body ensures that the P+ back is ready before allowing
release of the next shot. On other camera bodies not using the
electronic interface from the P+ back, the user has to wait for the
ready beep signal before releasing the next shot.

The IR filter (Infrared reduction filter) is permanently mounted on
top of the CCD.
The filter may not be removed for several reasons:
The focusing of the P+ back camera back will be damaged.
It is only possible to remount the filter without dust in
between the filter and the CCD if you have access to special
clean room facilities.
The Phase One Product Warranty is terminated.
•
•
•
