Reference Manual





When operating in a studio, where connected to a

computer via FireWire you are not dependent on battery power

or storage media. You can capture directly to the Phase One

Capture One Raw workflow software on either Mac or PC,

providing power to the P+ back via FireWire without the battery

or CF-card inserted.

When operating tethered you have the option of capturing

the images to the CF-card or transferring captures directly

to the currently assigned capture folder in the Capture One

application on the computer hard disk.

The display on the P+ back can either be turned off while

shooting tethered or set to display the images while they are

shot, just as if shooting untethered.

When unplugging the P+ back from the FireWire, the P+

back will default to untethered mode, capturing to CF-card or

microdrive, and using the battery for power.

Also when capturing tethered to a laptop with 4 pin mini 1394/

FireWire without power it will require a battery in the P+ back.

With the (non P+) P 20 and P 25 it is nessacary to use the

Phase One “No Firewire Power Solution” Part.# 70508 to force

battery power.

Using the four menu buttons you can setup the preferences for

all these operational features.

I.e. the display time of the images, time before backlight is

dimmed, ISO, file format and white balance.

ISO

Play

