User Guide
94
Splash Screen
Follow the proceeding steps to customize the splash screen on the
IQ back.
1.Save the image le to a maximum 800 x 480 pixels resolution
(landscape format). A smaller le will also be accepted and placed in
the center of the screen with the surrounding space lled with black.
2. Save the le as a 24 bit BMP or 24 bit TIF format le. Name
the le ‘Splash’ followed by the le extension. E.g. Splash.bmp or
Splash.tif.
3. Transfer the Splash.bmp or Splash.tif le onto a CompactFlash
card. Ensure it is not in any sub-folder.
4. Insert the CompactFlash card into the IQ back and select Menu
> Display > Splash Screen > Load from CF. An error screen will ap-
pear if the le is in a sub-folder or named incorrectly.
5. A conrmation screen will appear stating that a ‘Successfully
created new splash screen’. The image will appear on-screen each
time the IQ back is switched on.
6. Select Set to Default to remove the selected splash screen and re-
turn to a blank black splash screen. A conrmation screen will ap-
pear stating that a ‘Splashscreen set to default’.