User Guide
70
6.3 Info Bar
The bottom of the screen features an Info Bar that displays a Power
Indicator that shows the remaining battery capacity and a FireWire or
USB3.0 icon if the IQ2 is being used to shoot tethered. The Power
Indicator will start blinking when it runs low to warn users that the
battery needs to be replaced before capturing any more images. The
FireWire or USB3.0 icon will also blink on and off to signify that there
is a connection problem when set to their respective storage modes.
(See Storage Mode on page 91)
Thumbnail and Tool View also display the current image number and
the number of images captured on the media. In this example it shows
number 4 out of 14 images.
6.4 Play Mode Navigation
Press the Up and Down (right external) buttons to scroll through
captured images in all the Play modes. Press the upper and lower left
external buttons to zoom in and out of an image or switch to a different
Play mode.
Swipe your nger left or right to scroll through captured images on all
Play mode views. The selected thumbnail is highlighted with an orange
border.
6.5 Zoom
Tap the screen once in the Tool View to see a Full Screen image. The IQ
back enables users to zoom into a review image by up to 400%.
Instantly zoom into a specic area at 100% by tapping the screen twice
or by pressing the lower left (external) button. Double tap the screen
again or press the upper left button to return to the full screen view.
To zoom up to 400%, slide your nger up and down the Zoom Slider
on the left side of the screen. Use the Zoom Slider to also return to the
Tool and Thumbnail Views by sliding you nger down when a full screen
image is displayed.