User Guide
63
5.6 Custom White Balance
To create a new Custom White Balance, rst capture a reference White
Balance image. (Try to use a gray card or neutral white surface). Next,
select the Context menu and press the White Balance Picker icon.
(Ensure that the image is in full screen view)
Zoom in and pan to a desired part of the image and then tap on a white/
grey area to create a custom WB. A cross-hair icon will appear on the
screen. You can continue to pick WB point elsewhere in the image until
you are satised with the generated WB. The Custom White Balance
is now set and all subsequent captures will use this WB setting in Auto
Save mode. The picked WB is only applied to the current image if Auto
Save mode is deselected.
The IQ Back enables users to create and store up to 3 Custom White
Balance settings. To create and store a Custom WB setting go to the
Context menu and long press the White Balance Picker icon. Deselect
the Auto Save box in the dialog box.
The next time you create a Custom WB setting you will be presented
with a Custom 1, Custom 2 or Custom 3 option. Choose a number to
save and store the WB setting.
This stored Custom WB settings can be accessed again for future use
by scrolling to the bottom of the WB options.