User Guide

55
4.6 CompactFlash Card Usage
It is important to follow a few simple guidelines to help avoid loss
of data when working with CompactFlash cards, card readers and
digital cameras. Phase One recommends that you test-drive all new
CompactFlash cards including the one that comes with your IQ back.
By performing an initial test to verify that the capture les are stored
properly on the card and can be accessed on a computer you will
avoid unpleasant surprises on location or when you return from a job.
CompactFlash cards are manufactured by other suppliers and Phase
One cannot guarantee that the cards are not defective.
Inserting and Ejecting on the IQ2 Back
The CompactFlash card is inserted in the hidden slot located under the
cover on the left hand side of the IQ back.
Insert the CompactFlash card with the brand label facing the display
end of the digital back as shown in the image.
The cover can be closed when the CompactFlash card is fully inserted.
To eject the card push the small button above the card once, and an
ejecting pin will come out. Pushing this pin all the way back in will eject
the card.
Microdrives are not recommended for use with IQ backs.