User Guide
37
3.8 Drive Dial
Single-Frame Mode
One photograph is taken each time the shutter release button is pressed.
Set the shutter release mode selector to S.
Continuous Mode
Photographs are exposed as long as the shutter release button is
pressed.
Set the shutter release mode selector lever to C. Photographs are taken
continuously at a rate depending on the buffer speed of the digital back
mounted on the camera.
Mirror Up Mode
When the shutter button is pressed, the mirror moves up, and when the
shutter button is pressed again, the shutter is tripped and a picture is
taken.
Self-Timer Mode
In this mode, the shutter will be released 10 seconds after the shutter
release button is pressed.
Activate the self-timer by pressing the button. Next, rotate the
front dial so that On is displayed in the camera’s LCD and press the
shutter release.
When the shutter release is pressed, the self timer lamp will blink
continuously for 7 seconds, followed by 3 seconds of rapid blinking
until the camera releases the shutter.
C
S
L
M.UP
C
S
L
M.UP
C
S
L
M.UP
P
Av
Tv
M
X
CF
C1
C2
C3