User Guide

P: Program AE - The aperture and shutter speed are determined

automatically for the optimum exposure, according to the ambient light

conditions. This auto mode is best suited for general photography or

for novice photographers, as it leaves the user free to concentrate on

framing and capturing the subject.

Av: Aperture priority AE - Set the desired aperture and the camera

selects the correct shutter speed. Use this mode to control depth of eld.

Tv: Shutter priority AE - Set the desired shutter speed and the camera

selects the correct aperture. Use this mode to stop motion.

M: Manual mode - Set this mode when you want to use special

combinations of the aperture and shutter speed.

4. Exposure metering mode is automatically set to average/spot

exposure metering before exposure metering is performed.

There are three exposure metering modes: In the A mode the average

brightness in the entire frame is measured with emphasis on the center

of the frame. The brightness at a specic spot in the center of the

frame is metered in the S mode. The A-S mode automatically switches

between these two modes depending on the contrasts in the picture.

NOTE:

When a polarizing lter is used, ensure

that a circular polarizing lter (C-PL) is

used. The correct exposure cannot be

obtained with a normal (linear) polarizing

lter (PL).