User Guide

17
2.6 Attach and Remove a Lens
1. Remove the front body cap in the same way that you would remove a
lens; push the lens release button [A] backward and then turn the front
body cap or the lens itself counter clockwise and lift out.
2. Align the white alignment dot of the lens [B] (on the shiny ange) with
the camera’s white dot [C]. Mount the lens and rotate it clockwise until
it clicks into place.
3. To remove the front lens cap, squeeze the shiny sections together
and lift out. (See image far left). To remove rear lens cap turn it
counterclockwise.
Remove a Lens
While sliding the lens release button[A] back, rotate the lens counter
clockwise until it stops, and lift it off. After removing the lens from the
camera body, protect both ends by attaching the caps.
N.B. Oil, dust, ngerprints or water on the electronic contacts could
result in malfunction or corrosion. Wipe such impurities off with a clean
piece of cloth. Do not tap the distance ring or other rotating parts when
attaching the lens. When installing a lens, do not press the lens release
button.
MF
80mm
1:28
AF
22
22
11
11
4
4
ft
m
A
80mm
1:28
MF
AF
11
4
4
22
22
20
0
5
ft
m
C
B
80mm
1:28
MF
AF
11
11
4
4
22
22
20
0
5
A
11
11
4
4
22
22
20
ft
m