User Guide

153
16.6 Hasselblad 501 CM and 503 CW without Winder
The Phase One IQ back can also be used with mechanical Hasselblad
cameras such as the 501 CM and 503 CW. These cameras are operated
in single shot mode via the shutter release button or a standard cable
release.
WARNING! Please note that the Phase One IQ back should not be
mounted while the camera is set to mirror up. Also ensure that the lens
is not jammed or locked open on the “B” setting when connecting the
ash sync cable to the Phase One IQ back.
Shutter Latency Setting
Set the latency setting to Normal on the IQ back while using a me-
chanical Hasselblad. Set the latency setting to Zero whilst using the
Mirror Up function or if you need to rapidly press the shutter button.
Precautions must be taken not to trigger the shutter too fast when
using Normal latency. If any problems arise, it is recommended
that users look at the green LED on the back while slowly pressing
the mechanical trigger on the camera body. Users can safely press
the button all the way in the moment the LED ashes.
16.7 Hasselblad 503 CW with Winder CW
WARNING! Please note that the Phase One IQ back should not be
mounted while the camera is set to mirror up. Make sure that the lens
is not jammed or locked open on the “B” setting when connecting the
ash sync cable to the Phase One IQ back.
Set the Shutter Latency to Zero when using a 503 CW winder with an
IQ back.