User Guide
149
16.2 Mounting a Viewnder Mask on a Hasselblad V Series
Camera
The image area of a Hasselblad V camera body at approx. 6x6cm is a
different size to the three IQ model’s sensors so it is necessary to insert
a viewnder mask.
There are two different masks available for Hasselblad V series
cameras according to which IQ is being used. The size IQ280 and
IQ260 models CCD is 53.9x40.4 mm while the IQ140’s CCD measures
43.9x32.9mm. Please check page 168 for the relevant viewnder mask.
Insert a Viewnder Mask
1. Remove the protection tape from the mask.
2. Dismount the waist-level nder and remove the focus screen.
3. Place the viewnder mask in the bracket that holds the focusing
screen.
4. Re-mount the viewnder focus screen.
5. Slide the waist-level nder back into place.
N.B. Please check the relevant Hasselblad camera manual instructions
before removing the focus screen.
2.
1.
3.
4.