User Guide

147
15.3 More Details: Mamiya RZ67
Mode Selector
The mode selector on the trigger button should be turned to the white
dot when used with the IQ back. The selector should be set to the
orange dot to avoid draining the small battery when the IQ back is
attached to the body and not in use.
Warning: Even if the IQ back is turned off, the battery will drain slowly if
the orange dot is not selected
Shutter Latency Setting Mamiya RZ PRO II
An IQ back should be set to Normal Latency when it is used with
a Mamiya RZ PRO II.
Shutter Latency Setting Mamiya RZ PRO IID
Select the special Mamiya RZPRO IID camera mode, which avail-
able in the Camera mode menu to ensure that the correct latency
setting is used.
Studio Flash Sync on the RZ lens
A ash sync lead should be connected to the port on a lens when an IQ
back is used on a Mamiya RZ67 PRO IID. On the older PRO II, use the
ash sync connector on the Adapter plate. (The ash sync port on the
IQ back is for use with Large format cameras where no digital interface
is available).
Mirror Up
Mirror up operation is only recommended if using Mamiya’s own double
cable release.
Double Exposure
Is is only possible to get a double exposure when a Hasselblad V
mount plate is being used. Avoid a double exposure by waiting for a
ready-beep from the IQ back before capturing another image.