User Guide

124

9.16 Custom Dial Modes C1, C2 or C3

Mode dial options C1, C2 and C3 can be used to store preferred

settings.

These settings can be changed instantly to suit the photographer's

needs. Users can change the settings on the camera body or via an IQ

back.

Programmable settings are exposure mode, P (program AE), Av

(aperture priority AE), Tv (shutter speed priority AE), X (synchro mode),

M (manual mode) and spot metering.

Programming the Custom Dial Modes C1, C2 or C3 via the camera body

1. Go to the setting you wish to assign to C1, C2 or C3.

2. After arriving at the setting you wish to assign, hold the SET button

down while turning the mode dial to C1, C2 or C3. When you release the

SET button, the chosen setting will be programmed to your selection

of C1, C2 or C3.

C1, C2 or C3 modes can be changed while photographing. However

after taking a photo in a mode other than the modes selected in C1, C2

or C3, when you turn the dial back to a C mode setting the change will

not be saved.

NOTE:

Even when the power is switched

off, the mode recorded will still be

saved to C mode.

* The illustration shows the exposure mode Av (aperture priority

AE) being recorded to C2.