User Guide

121
C-10 Release button [HALF]
This function is used to set the AE lock and AF operations when the
shutter release button is half-pressed.
0: AF operation (default setting)
1: AF & AE operation
2: Only shutter release
C-11 AEL function lock/unlock mode [AEL]
This function is used to set the method of operating the AEL button
to lock AE. At the default setting, when the AEL button is pressed,
AE is locked; pressing the button again releases the AE lock. At the
“1” setting (released after one shot), after AE lock is set, it is released
when the shutter is triggered. At the “2” setting, AE lock is only kept
while the AE lock button is being pressed.
0: One shot
1: Continuous
2: While pressed
C-12 AFL [AFL]
This function is used to set the AF lock method when the AFL button
is operated. AF >< Lock is activated with one press of the auto-lock
button then deactivated with a second press.
0: While pressed (default setting)
1: AF operation
2: Continuous
C-13 M-mode AEL [OnEP]
When using M (manual mode) one push function, the shutter speed
or aperture value can be set automatically by pressing AEL button.
0: Shutter speed shift [tv]
1: Aperture value shift [Av]
2: No [no]
C-14 AF assist setting [AF_L]
The AF auxiliary light res automatically when the subject is too dark
to perform AF, but this function can be used to prevent the AF auxiliary
light from ring.
0: On [On]
1: Off [OF]
C-15 Flash sync. [FLSY]
When shooting moving subjects with ash you can set the synchronization
timing. This allows you to have the ash re at the beginning of the
exposure or at the end of the exposure.
0: First (default setting)
1: Second
C-16 Beep [bu]
When the SET button is pressed a beep sounds
0: ON (AF) (Default setting)
1: ON
2: OFF
C-17 Shutter TV, AV & P [Sh_P]
When using P, Av or Tv mode and the leaf shutter lens is attached but
you prefer to use the focal plane shutter.
0: Mixed. Default (Focal Plane shutter operation at < 1S)
1: Leaf shutter
2: Focal plane shutter
C-18 Shutter in M & X [Sh]
When initializing the setting, use of the lens shutter (and its respective
ranges) or the focal plane shutter can be chosen when the leaf shutter
lens is attached.
0: Mixed. Default (Focal Plane shutter operation at < 1S)
1: Leaf shutter
2: Focal plane shutter
C-19 AF Priority [AF_2]
Accuracy of auto-focusing priority (default setting) or speed priority can
be decided. Use the front dial to scroll to Custom function 19 and the
rear dial to set AF Priority to one of the following:
00: Speed
01: Accuracy
Please note: On IQ, P 65+ or P 40+ digital backs, this CF function can
also be set from within the digital back menu system: Menu > 645DF >
Setup Custom A > AF priority