User Guide

110
Single-Frame Mode (S)
Press the shutter release button for each shot. The camera meters
adequate exposure value for each shot and performs Auto Bracketing.
The camera stays in the Auto Bracketing mode until you cancel the
Auto Bracketing mode manually.
Continuous Mode (C)
By pressing the shutter release button once, the camera takes 3 shots
in series. With each full press of the shutter release button, the camera
repeats auto-bracketing. The standard (normal) exposure value will be
xed when you take the rst frame.
Cancelling Auto Bracketing
When you want to cancel the auto-bracketing mode, turn the rear dial
to change “On” to “OF”.
NOTE:
When exposure compensation is
initiated by pressing the exposure
compensation button, shooting in
Auto Bracketing mode is possible
using the exposure value to which the
exposure compensation value has
been added.
Exposure Mode Setting
P
Program AE Shutter speed varies
Av
Aperture Priority AE Shutter speed varies
Tv
Shutter Priority AE Aperture varies
M
Manual Mode Shutter speed varies
X
X-sync mode No setting
AE Settings Under Auto-bracketing Mode