User Guide

87
7.4 Check Disk
A disk check is performed on every memory card that is inserted into the IQ1
back. Phase One recommends leaving this feature turned on, to maximize
data security on the memory cards. This feature can be deactivated in this
menu. Read more about the Phase One Secure Storage System on page 55
of this User Guide.
7.5 Storage Mode
Storage allows users to congure how an IQ1 back should store the captures
created. Auto is the default storage setting and it will detect and automatically
store images les to a memory card if it has been inserted in the IQ1 back.
If the IQ1 back is being used to shoot tethered, it will store image les directly
to the computer via the connected FireWire 800 cable. The FireWire will
have priority if a card is in the IQ1 back at the same time as it is connected by
FireWire to a computer.
N.B The IQ1 back can be forced to shoot to either CompactFlash or via a
FireWire 800 cable to a computer by selecting CF or FireWire respectively. An
Error Message will appear on the IQ1 screen if the IQ1 back is not tethered to
a computer and the IQ1 card slot is empty.
7.3 Format Card
Select Format Card to erase all data on a memory card. Memory card
formatting is done in either FAT 16 or FAT 32 depending on card size. (IQ1
backs support CompactFlash cards formatted in both FAT 16 and FAT 32).
Power-Up and Down from 645DF+
1. Turn on the 645DF+, and the IQ1 back will automatically power up.
2. Turn o power on the 645DF+ and the IQ1 back will power down after
10 seconds, unless it is interrupted manually on the screen or by pushing a
button.
This feature is not fail proof, and if operated quickly in sequence, the back
may not power on or o properly.
If you want to disable this feature - this can be acheived via the Power
Management menu.