User Guide

49
1.
2.
2.
3.
4.
4.1 Quick Start (shooting untethered)
1. Connect an IQ1 digital back to the camera and install the focusing screen if
applicable.
2. Charge the batteries (See page 15) then insert them into the camera.
3. Insert a CompactFlash card into the IQ1 Back.
4. Switch on the power to the back and camera and select a drive mode.
5. Choose an exposure mode.
6. Select a focus mode on the camera body and lens if applicable.
7. Set the date and time. (See page 24).
8. Set the ISO and White Balance. (See page 27).
9. After shooting, transfer images into Capture One Pro software from the
CF card using a card reader.
10. Editing images in Capture One Pro and output as required.
5.
6.
4.