User Guide

155
17.5 Cables required for IQ1 back for the Contax 645
Part# 50300143 Multi-connector to Lens sync (for use with Large format - in
two shot mode)
Part# 50300144 From multi-connector to mini jack female (for use to
adapt older Large format wake-up cables or older Kapture Group one
shot adaptor cables to connect to the multiport).
Part# 50300154 From multi-connector to mini jack on the Contax handgrip
(used to enable Host Capture from Computer)
N.B. Operating the camera from the host computer
The supplied release cable must be connected between the multiple-pin
connector on the IQ1 back and the mini-jack connector placed at the bottom
of the handgrip on the Contax camera house.