User Guide
140
15.2 Mounting a Viewnder Mask on a Hasselblad V Series Camera
The image area of a Hasselblad V camera body at approx. 6x6cm is a dierent
size to the four IQ1 model’s sensors so it is necessary to insert a viewnder
mask.
There are two dierent masks available for
Hasselblad V series cameras
according to which IQ1 is being used. The size of the IQ180 and IQ160
models' CCD is 53.9x40.4 mm while the IQ150's CMOS and the IQ140’s CCD
measures 44x39mm and 43.9x32.9mm, respectively. Please check page 159
for the relevant viewfinder mask.
Insert a Viewnder Mask
1. Remove the protection tape from the mask.
2. Dismount the waist-level nder and remove the focus screen.
3. Place the viewnder mask in the bracket that holds the focusing screen.
4. Re-mount the viewnder focus screen.
5. Slide the waist-level nder back into place.
N.B. Please check the relevant Hasselblad camera manual instructions before
removing the focus screen.
2.
1.
3.
4.