User Manual
Page 52 of 57
Document Reference Phalcon-NT11, Issue 2 and Date 24/10/18
THIS IS THE PROPERTY OF Pharos Marine Automatic Power. DISCLOSURE OR REPRODUCTION IS FORBIDDEN UNLESS AUTHORISED
Registered Address: 14 Castle Mews, Hampton, England, TW12 2NP Company Reg. No. 06757705 VAT Reg. No. GB222645483
1.15 Configure Sleep cycles “SLEEP”
1.15.1 Description
The Sleep Command allows the following modes:
Unit Mode:
Sleep
Sleep and RX
Wake up on number of pulses received
1.15.2 User Rights
Client Linwave Factory
User Rights
YES
YES
YES
1.15.3 Command and Parameters
Command SLEEP
Parameter Title Type Min Max Description
P1 SLEEP TIME no
traffic
UINT32
4 Time Set in Seconds
P2 Listening period to
detect traffic
UINT32
4 Time Set in Seconds
P3
SLEEP
TIME if
traffic present
UINT32
4
Time
Set in Seconds
P4 Min’ Number
Pulses to Wake (if
pulses detected
during listening
period)
UINT16
0 65535 Number of pulses to count to wake
up the unit, within the set Sleep and
RX Time.
1.15.4 Command Return
Command SLEEP
Parameter Title Type Min Max Description