User Manual
Page 44 of 57
Document Reference Phalcon-NT11, Issue 2 and Date 24/10/18
THIS IS THE PROPERTY OF Pharos Marine Automatic Power. DISCLOSURE OR REPRODUCTION IS FORBIDDEN UNLESS AUTHORISED
Registered Address: 14 Castle Mews, Hampton, England, TW12 2NP Company Reg. No. 06757705 VAT Reg. No. GB222645483
Figure 14 Morse Characters in Docklight
1.10 Set Number Of Radar Responses “RADARRES
1.10.1 Description
Set Radar Response sets the number of times the transponder will respond to an incoming Radar synchronised to the
ships main Radar lobe.
For example setting to 1 will output once to the ships radar system, 3 would output 3 responses when it sees the
ship. If the transponder does not detect the ships Radar on any of the required output response, no output Morse
response will be attempted.
The relationship to the output responses and the time the system is running is linked to the number of responses
and the ship’s sweep period. For example if the output response is set to 3 and the ship’s sweep rate, which was
received is once every 2.5 seconds it would take 7.5 seconds before all the output responses are completed. The
system only enables the transmitter if the correct ship characteristics are matched during the receive cycle.
To commit the changes to memory use the Save Configuration “SAVE” command and Get Configuration “CFGGET”
command to confirm the operation.
1.10.2 User Rights
Client Linwave Factory
User Rights YES YES YES