User Manual
Page 39 of 57
Document Reference Phalcon-NT11, Issue 2 and Date 24/10/18
THIS IS THE PROPERTY OF Pharos Marine Automatic Power. DISCLOSURE OR REPRODUCTION IS FORBIDDEN UNLESS AUTHORISED
Registered Address: 14 Castle Mews, Hampton, England, TW12 2NP Company Reg. No. 06757705 VAT Reg. No. GB222645483
1.6.5 Example
Figure 10 Running built in test
1.7 Set Morse Length Auto On or Off “MORSELENAUTO”
1.7.1 Description
Enable or Disable the Auto Morse Length Feature. When enabled the system will automatically adjust the response
length timing depending on the pulse duration received. The received Pulse Length to Response Length is factory
configured in the auto mode.
If the transponder is only required to output a fixed length the function should be disabled “OFF”. The fixed length
can be set via the Set Morse Length command 1.8.
To commit the changes to memory use the Save Configuration “SAVE” command and Get Configuration “CFGGET”
command to confirm the operation.
1.7.2 User Rights
Client Linwave Factory
User Rights
YES
YES
YES
1.7.3 Command and Parameters
Command MORSELENAUTO
Parameter Title Type Min Max Description
P1 STATE STRING ON OFF Set if the function is ON or OFF
P2
P3
1.7.4 Command Return
Command MORSELENAUTO