User Manual

Page 30 of 57
Document Reference Phalcon-NT11, Issue 2 and Date 24/10/18
THIS IS THE PROPERTY OF Pharos Marine Automatic Power. DISCLOSURE OR REPRODUCTION IS FORBIDDEN UNLESS AUTHORISED
Registered Address: 14 Castle Mews, Hampton, England, TW12 2NP Company Reg. No. 06757705 VAT Reg. No. GB222645483
Command Structure
Command followed by Line Feed, Carriage Return.
All Commands return an ‘OK’ or ‘ERR’ String
Figure 2 Example Return 'OK'
Figure 3 Example Return Error from Command not known
Client (End User) Commands Index
Most of the commands are listed in the Docklight configuration file: CNF-3187 Config File 248-0009 Docklight Client
Commands[P039-1955]
ID Command Title Command Section
1.
Get Alarms ALARMS 1.1
2.
Set Band S On or Off
BANDS
1.2
3.
Set Band X On or Off BANDX 1.3
4.
Set Beacon ID BEACONID 1.4
5.
Get Configuration CFGGET 1.5
6.
Built In Test
BIT
1.6
7.
Set Morse Length Auto On or Off MORSELENAUTO 1.7