User Manual

Page 18 of 57
Document Reference Phalcon-NT11, Issue 2 and Date 24/10/18
THIS IS THE PROPERTY OF Pharos Marine Automatic Power. DISCLOSURE OR REPRODUCTION IS FORBIDDEN UNLESS AUTHORISED
Registered Address: 14 Castle Mews, Hampton, England, TW12 2NP Company Reg. No. 06757705 VAT Reg. No. GB222645483
Safety
Only trained and approved technicians should attempt to disassemble the transponder or attempt to repair or
replace any items with the transponder. RF power levels and surface temperatures within the transponder may
exceed safe limits if the unit is still operating and/or has been recently operating at temperatures in excess of 60°C.
Before attempting to disassemble the device in any way it is therefore mandated that the power connection is to be
removed from the device and that the device is allowed to stabilise at a temperature of less than 60°C for at least an
hour before the external cover is removed.
Regulatory Compliance
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.