Owner's Manual

ManualsBrandsPhantom ManualsRECOVERY DevicesPHANTOM RECOVERY Effects and Devices

Controls

SPEED

Controls Sample/Hold speed. It only

functions in Sample/Hold mode.

RES

Controls the amount of filter

resonance.

ATTACK

Controls the attack of the filter.

Turning clockwise produces a higher

filter frequency.

DECAY

Controls the speed of the filter

decay. Turning clockwise will

increase the decay time.

MODE

Toggles between VCF and

Sample/Hold modes.

BYPASS

Turns the effect on and off.

The Phantom Operator is a

supernatural filter with a mind of its

own. Its rhythmic paranormal activity,

you may think there’s a ghost at the

helm. The haunted randomization

makes you feel like you’ve entered

the Twilight Zone. Plug into this pedal

for endless inspiration that

challenges you to compete against an

otherworldly spirit!

Achieve rhythmic patterns, complex

tremolo, cadenced filters, and hard,

glitched-out sounds with Sample and

Hold mode. The Voltage Controlled

Filter mode is an incredibly smooth,

classic low-pass, conducted by the

dynamics of the input. Controls allow

manipulation of filter frequency, as well

as resolution, attack, and decay.

The Phantom Operator includes mode-

changing via foot switch, with status

and speed indicators. It’s 100 percent

analog, true bypass, and hand-wired

with quality, through-hole components.

tip power supply.

PHANTOM OPERATOR

(Supernatural Random Flux Filter)

Summary of content (2 pages)

PAGE 1
The Phantom Operator is a supernatural filter with a mind of its own. Its rhythmic paranormal activity, you may think there’s a ghost at the helm. The haunted randomization makes you feel like you’ve entered the Twilight Zone. Plug into this pedal for endless inspiration that challenges you to compete against an otherworldly spirit! Controls SPEED Controls Sample/Hold speed. It only functions in Sample/Hold mode. RES Controls the amount of filter resonance. ATTACK Controls the attack of the filter.
PAGE 2
FAQ: Enclosure size: Q: Is there a way to add a tap tempo or clocking option to the Phantom Operator? 4.67" x 3.654" x 1.547" Available colors: Cream & red A: Even though there's a steady pace on the speed indicator, the sample and hold is responsive to dynamics of the instrument, making syncing pretty difficult. It's one of the reasons it's billed as a "random filter". There isn't a clocking option that we suggest or offer support for. Questions? Send us an email: recoveryeffects@gmail.