Instructions

16
Scrolling text
Icons
Segments
Units
Function or parameter

 ,
On/off switch


.-.
A
Maximum charge current

 -
V
System voltage

,-
Type
Charge algorithm (1)


.-.-.
V
Absorption voltage (2)

.-.-.
V
Float voltage (2)


.-.-.
V
Equalization voltage (2)


 ,
Automatic equalization (3)


 ,
Manual equalization (4)

. ,--
Relay function (5)


 .-.-.
V
Low battery voltage alarm set


.-.-.
V
Low battery voltage alarm clear


 .-.-.
V
High battery voltage alarm set


.-.-.
V
High battery voltage alarm clear


 .-.
V
High panel voltage alarm set


.-.-.
V
High panel voltage alarm clear


 -
Relay minimum closed time
(minutes)


.-.-.
°C mV
Battery temperature
compensation per cell (2)

.-.-.
A
Tail current


.-.-.
h
Absorption time


 ...
V
Re-bulk offset voltage (subtracted
from setting 6)


 ..
A
Max. charge current below the
low temperature level (item 30)


 .--.
°C
Low temperature level (for item
29)

 ,
BMS Present (6)

 
Load control (7)

 .-.-.
Load user defined low voltage


 .-.-.
Load user defined high voltage


.-.-.
h
Automatic equalization maximum
time


,
Equalization stops when voltage
(setting 8) reached


--
Equalization current percentage
(percentage of setting 2)


-
Backlight intensity


 ,,
Backlight automatic turn off after
60s (8)

--
Text scroll speed

 
VE.Direct port RX pin mode (9)

 
VE.Direct port TX pin mode (10)

 -
VE.Can network address


 -
VE.Can device instance

.
Software version


Reset to default settings (11)


History data reset (12)