User manual

Phaesun GmbH · Brühlweg 9 · 87700 Memmingen · Germany · Telefon +49

(

8331

)

990 42 - 0 · Telefax +49

(

8331

)

990 42 - 12 · info

phaesun.com · www.phaesun.com

Step 1

Slip a washer on one of the

wing nuts and stick the wing

nut through rail and sustainer.

Step 2

Slip another washer, snap ring

and wing nut on the wing

screw and tighten the screw.

Assembly of support structure 1

2x rail

1x sustainer

3x wing screw

6x washer

3x wing nut

3x snap ring

Bill of Materials:

4x rail (1)

2x sustainer (2)

6x wing screw (3)

12x washer (4)

6x wing nut (5)

6x snap ring (6)

Solar Module Support Structure

PN-SMS 2

31.01.14_DAH

PAGE 1
Solar Module Support Structure 31.01.14_DAH PN-SMS 2 Bill of Materials: 4x 12x 2x rail (1) sustainer (2) x wing screw (3) 6 6x washer (4) wing nut (5) x snap ring (6) 6 Assembly of support structure 1 2x rail sustainer 3x wing screw 6x washer 3x wing nut 3x snap ring 1x Step 1 Slip a washer on one of the wing nuts and stick the wing nut through rail and sustainer. Step 2 Slip another washer, snap ring and wing nut on the wing screw and tighten the screw.
PAGE 2
Step 4 Screw the two sustainers together. Step 3 Turn the rail upward and use a second rail to form a triangle. Tighten the rail to the sustainer as mentioned before. 4 3 Assembly of support structure 2 2x rail sustainer 3x wing screw 6x washer 3x wing nut 3x snap ring 1x Step 6 Arrange the two sides in parallel and fix the solar module. Step 5 Assemble the second support structure as before. Please observe to assemble sideinvertedly.