User manual

ManualsBrandsPHAESUN ManualsSolar & Wind PowerWind turbine Stormy Wings 1000_24 Performance (at 10m/s) 1000 W

2. Wind Turbine Assembly

Installation on site is simple, mainly including mounting blades on the hub, securing the hub to the turbine body, installing the nosecone on the blade hub and mounting wind turbine on

the pole.

Please install the whole turbine in accordance with the following instructions.

2.1 Mounting Blades on The Hub

①Check if all components are in good condition. ②The hub, washer, bolt and nylock nut ③The blades.

④Pass the hex bolts through from the ⑤Place blade, flat washer and nylock nut, ⑥ Assembled.

back side of the hub. and tighten the nut to 18N.m