User manual

Special installation 1: pitched rooftop

Explanations：

1. This installation is workable for pitched rooftop house.

2. This wall-mounted installation is used expansion bolt to fix the

supporting structure.

3. The wall should be concrete or solid wall.

4. Try to install the turbine in an upwind direction position.

5. The lowest point of the blade should be above the rooftop.

Dimension requirement:

①

1.2 m ≤distance from rotor centre to top of rooftop “L“≤ 2.0

②

1.5 m ≤distance from rotor centre to the first supporting

point“L“≤ 2.5 m

③

1.0 m ≤distance between the two supporting points“L”≤

1.5 m

④

Pole diameter≥Outer DiameterΦ60mm×thickness 6.0mm

seamless pole