Installation Instructions

Lip Frame Fixed Lite - Heavy Duty

INSTALLATION

Step 1: Dry fit unit into opening to ensure proper fit before applying any sealant.

Step 2: Remove unit from opening and caulk the outside perimeter of opening and along

the joint where the horizontal member meets the vertical upright post with the

appropriate sealant.

Step 3: Center and square the unit in the opening. Attach one of the top corners,

through the front flange, to the substrate (Illustration A). Level the unit and

fasten the remaining three corners while ensuring the unit is plumb, level and

square.

Step 4: Additional fasteners may be required depending on the size of the unit. All four

sides of the unit should have fasteners no farther than 12” apart.

Illustration A

Heavy Duty Lip Frame

PAGE 1
Installation Instructions Lip Frame Fixed Lite - Heavy Duty INSTALLATION Step 1: Dry fit unit into opening to ensure proper fit before applying any sealant. Illustration A Step 2: Remove unit from opening and caulk the outside perimeter of opening and along the joint where the horizontal member meets the vertical upright post with the appropriate sealant. Step 3: Center and square the unit in the opening. Attach one of the top corners, through the front flange, to the substrate (Illustration A).