User's Manual

PAINTGUNS INTERNATIONAL, LLC
5
55
5
CAUTION: Balls can be discharged
from drop tube until secondary
regulator is adjusted correctly
.
21. Secondary regulator pressure is correctly set
by loading two balls at a time and increasing
secondary regulator pressure until second
ball drops freely into the breach.
22. When the second ball drops freely in to the
breach, set jam nut on secondary regulator
screw.
Note: Air venting from the solenoid valve means
secondary regulator pressure is set too high and
adjustment process must be repeated
..
WARRANTY
Paintguns International, LLC warrants each new
FIRESTORM
it manufactures to be free from
defects in material and workmanship for a period
of 1 year from the date of purchase. This limited
warranty does not cover damages caused by
normal wear and tear or misuse by purchaser.
If a
FIRESTORM
part becomes defective
during the warranty period, PGI. will replace the
defective part free of charge to the original
purchaser (less shipping). Proof of purchase must
be provided, along with the defective part. If the
purchaser wishes PGI to install the new part,
labor will be extra.
PGI has no control of the use of its
FIRESTORM
and therefore assumes no
responsibility for damages caused to property or
person as a result of the use of the
FIRESTORM
.