User Manual

排版方式 封琴式 双面印刷
尺寸 宽 5CM 高 8CM
User 's manual
Quick Operation Guide
Safety information
This device does not have a power adapter. When
charging is required, please use a power adapter
that has obtained the CCC certificate and complies
with relevant standards.
Wireless microphone transmitter 2pcs
⑴ Windbreak
⑵ Microphone clip
⑶ Power Switch
⑷ USB Charging port
⑸ Microphone indicator
⑹ Receiver indicator
⑺ Lightning plug
⑻ Mobile phone charging port
⑼ USB plug
Packing list
Function Description
Technical specifications
Special Notice to Help Your Recordings:
Charging
Instructions
Indicator light description
Microphone transmitter：
Receiver：
Please use this equipment within the temperature
range of 0℃-40℃, and store the equipment and
accessories within the temperature range of -20℃-
+45℃. When the ambient temperature is too high or
too low, it may cause equipment failure.
Outline picture (Note: The outline picture is subject to
the actual product!)
1、Power-on but disconnected state: the red light and
green light on the front flash alternately；
1. Plug the receiver to your device and you'll see the
green light flashes.
2. Press and hold the power switch of the microphone
for about 1 second to turn it on and about 3 seconds to
turn it off.
3. If the green light for both of the receiver and
transmitter always keeps on, it means they paired
successfully. Then open the phone camera, live App
or other Apps to start recording.
1. For Microphone:
When the red light on the front of the microphone
flickers, it is in a low-power status and needs to be
charged by using the USB cable. When charging, the
front red light on the microphone will be on, and will
go off when it is fully charged.
The receiver itself has no need to be charged, but
you can charge your smartphone through the
receiver while you are recording and the mobile
phone is in low- power status. Just plug the charging
cable of your phone into the interface port of the
receiver, the mobile phone can be charged through
the interface.
1. Please make sure your device is unlocked and the
green light flashes after the receiver is plugged to
your smart phone.
2. Press the power switch of the microphone for
about 1 second to turn it on. If the green light for both
of the receiver and transmitter always keeps on, it
means they paired successfully.
3. To ensure the sound quality, please put the
microphone in a proper distance and do not put it too
close to your mouth. If you want to hold the
microphone in your hand, please hold the bottom of it
and do not cover the windbreak on the top.
4. Press the power switch of the microphone very
softly, the green light will keep flashing, which means
the recording was paused. By pressing the button
again, it will stop flashing and the recording will
continue.
5. Any time when you see the red light & green light
flashes alternately, it means the connection is failed
and you need to restart.
6. Press and hold the power switch for about 3
seconds to power off the microphone.
7. Please unplug the receiver before listening to your
recordings.
PS: Please follow up the instructions step by step
and we will always stand by if you have any
problems while recording. Should you have any other
question, please feel free to contact us:
Our Customer Service:
[e-mail]
Our Website: https://pgdlof.com
(If it's paired successfully but recording is failed
at the first time , please try to re-plug the receiver
as there is a setting named “DOCK” would
appear automatically).
2. For Receiver:
2、Power-on and connected state: the green light on
the front is always on；
3、Connected but recording paused: the green light on
the front flashes and by pressing the button very softly,
it will stop flashing and the recording will continue
5、Charging status: the front red light is always on; the
front red light is off when fully charged；
1、Power-on but disconnected state: green light flashes；
2、Power on and connected state: green light is always on
4、Low battery: red light flashes on the front；
Do not expose the device to high temperatures or
around heating devices, such as sunlight, heaters,
microwave ovens, ovens or water heaters, etc.
When charging is complete or not charging, please
disconnect the charger from the device and unplug
the charger from the power.
The device is equipped with a non-removable built-in
battery, please do not replace the battery yourself to
avoid damage to the device.
Please dispose of this equipment, batteries and
related accessories in accordance with local
regulations, and do not dispose of them as domestic
waste.
Warning:The battery ( battery pack or assembled
battery ) must not be exposed to such as sunlight,
fire or similar overheating environment；
Notice: If the battery is improperly replaced,
there is a danger of explosion. Only the same
type or equivalent type of battery can be used to
replace it.
Note: In order to ensure the effective use of the
connection, there should be no obstacles
between the microphone and the receiver. When
wearing the microphone for recording or live
video broadcasting, it is recommended to face
the receiver, otherwise the signal may be
interrupted.
1.
Wireless microphone receiver 1pcs
2.
User manual (including warranty card) 1pcs 3.
USB Charging cable 1pcs 4.
1
2
3
4
5
6
7
8
9
V4 1 2
3 4
5 6 7 8 9
Dimensions
Transmitter 64×15×23MM （With back clip）
USB
Lightning/TYPE C interface
Battery
3.7V/65MAH Lithium Ion Battery
Bluetooth
Buletooth4.0
Battery life
About 4.5 hours
Charging time
About 2 hours
Phone system
Bluetooth
receiving
distance
IOS 9.0 or above
Operating
-5 to 40C°
Weight
20g
Effective distance 20 meters
(no obstacles in the middle)
Power input
DC5V 500mA
Receiver 44×26×6MM（With USB plug）
Power Switch
Receiver Indicator