Upgrade Manual

Chapter 7: The 'Guitarist' 49
Guitar, single position". That will create chord solos that stick to a single
position on the guitar neck whenever possible.
2.
Select Melody (or Soloist)
track.
You'd normally want the Guitar Chord solo to be written to the
Melody track, but you can also select the Soloist track as the destination.
3.
Confirm the Selection the
Guitar Patch.
The Guitarist that you pick (see item #1) will already have
chosen the guitar patch to use, but you can over-ride it with this setting.
Select the Range of the song to use.
You can either generate a chord solo for
the whole song, or just a region of the song. In either case, remember that you
need to have an existing melody to work with (of course you can use the
Melodist to generate a Melody if you don't have one).