2012 (Macintosh)

Table Of Contents
Chapter 9: Recording Tracks 138
This allows you to set advanced settings for the Embellisher. These include,
- Vibrato Depth: This is the amplitude of the vibrato, ranging from 0 - 127.
- Vibrato Speed: This is the speed of the vibrato (slow-fast) range 0 - 127.
- Only use Vibrato if Note is this many ticks: e.g., If set to 120 ticks (one
quarter note), then only notes of at least that duration will get vibrato.
- Start the Vibrato after this many ticks: For notes that will get vibrato, the
vibrato will start after this many ticks.
- Adjust Octave Method: If the octave is to be adjusted, it will either only
adjust it if the notes are outside the playable range, or always adjust it to the
best octave, according to the setting you make here.
- Dynamic Range: Refers to the range of velocities used for the
humanization. Useful range 30 to 50.
- Legato Settings: Refers to the amount of legato for the notes. Useful
range 55 to 75.